Specifications subject to change without notice
© 2001 Atlas Sound LP
Printed in U.S.A.
00501
SL3-1518
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
CLOCK BRACKET STYLE
APPLICATION
MOUNTING HOLES/SLOTS
(supplied by clock manufacturer)
830, 840, NC850 Series Clock/Speaker Baffles
(for most applications)
STUD TYPE BRACKET
(bracket mounts through an attached bolt stud)
This configuration is typical of clocks by:
Cincinnati
Edwards
Faraday
Franklin
Standard
SPADE TYPE BRACKET
(bracket simply hooks into a slot on the hanger bracket)
This configuration is typical of clocks by:
American Time & Signal
Dukane
Lathem
Rauland
Simplex
PLATE STYLE BRACKET
(bracket supplied by clock maker bolts directly
to universal hanger bracket)
This is typical of clocks by National
TRIMMING
LOCATIONS
(use these cutting
locations only if needed
so that clock hanger
mounts correctly
to baffle.)
BAFFLE
MOUNTING HOLES
Use the correct holes to
mount bracket/clock to baffle.
Verify mounting holes
before any trimming!
INSTALLATION INSTRUCTIONS FOR UNIVERSAL CLOCK HANGER BRACKET
The universal clock hanger bracket (patent pending) allows mounting of virtually any new as well as most older clocks to Atlas Sound
clock/speaker baffles.The factory-installed hanger bracket allows flexible orientation of clock/speaker baffles at time of installation and comes
complete with hardware bag equipped with nuts, bolts and stud bolts.
1. Identify the clock bracket style used by the clock manufacturer (typical examples are shown below).
2. Determine portion(s) of the Universal Bracket required to mount the clock.
Note: Bracket can be unscrewed and re-oriented to meet individual needs.
3. Determine the proper orientation of the baffle. (vertical or horizontal) Verify mounting holes on the mounting bracket before trimming, if
trimming is required.
4. Attach the clock to the clock/speaker baffle.
Use trimming chart below
for cutting if needed
Breakaway straps
available for
special applications
if needed
STRAP HANGER
APPLICATION
(break away the hangers
from the side and bolt for
clock hanger)
This solution works on
obscure older models or
unique brands.
