Atlas UV H Series, Руководство пользователя

Страница: 17 / 28

1 7 | P a g e
System Service Suggested
L / H controllers will display the System Service Suggested Screen every
6 months to remind consumers to maintain both their UV and other
prefiltration. This will serve as a prompt only and will not put the system
into alarm. To clear this condition simply press the button located below
the screen.
Lamp Replacement (LE / HE systems)
After the lamp is expired, it must be replaced with the same part number as indicated by the
label on the reactor. Begin replacing the lamp by unplugging the power for the controller, then
refer to Installation, starting with step 11 (page 11) for instructions on installing the new lamp.
To reset the timer in the controller, firmly hold down the button on the controller for 10 seconds.
The controller will read “rSt3”, “rSt2”, “rSt1” and then beep . The button can now be released, the
lamp countdown timer has been reset.
Lamp Replacement (L / H systems)
After the lamp is expired, it must be replaced with the same part number as indicated on the
Maintenance Parts screen or on the label on the reactor. With the system powered down, re-
move and discard the lamp key from the controller. The replacement lamp is packaged with a
lamp key on the connector at the end of the lamp. Remove the key from the lamp and place it in
the controller. Refer to Installation, starting with step 11 (page 11) for instructions on installing
the new lamp.
QR Codes
A QR code (Quick Response code) is a matrix barcode first designed for the
automotive industry. Atlas uses the QR code to store a link to a specific page
on our website. Users with a camera phone equipped with the correct reader
application can scan the image of the QR code and over a wireless network
connect to a Atlas web page in the phone’s browser. Atlas’s QR webpage
has information on how to purchase replacement components as well as a
helpful video directory on system servicing (i.e. How to change a UV lamp
or quartz sleeve). To access the QR code on the Atlas controller, press the
control button until the QR code screen appears.