Operation And Use
41
PVL14OF-EXT
Controls for operating the lift are:
LIFTING BUTTON (1)
• When pressed, the power unit is running and the lift can be raised to a
desired height until the button is released.
AIR CONTROL VALVE (2)
• When pressed, the lock latches will be released so that the lift can be
lowered.
LOWERING HANDLE (3)
• When the air control valve is not pressed, press the lowering handle to
lower the lift to engage the nearest latch rack.
• When the latches are released by pressing the air control valve, press the
lowering handle in the meantime to lower the lift to the desired height
under its weight and the load lifted until the handle is released.
Lift operation can be summarized into three steps:
8.1.1 Lifting
• Pay attention to overhead clearance;
• The lift must be fully lowered and no one in the service area while the
vehicle is driven onto the lift;
• Position the wheels in center of each runway;
• Stop the vehicle when it contacts the front stops or at the desired position;
• Set the parking brake or place the wheel chops on each side of the rear
wheels;
• Make sure the all personnel must be exit before the lift is raised;
• Raise the lift by pushing the lifting button until reaching the desire height.
