manualshive.com logo in svg

Atlas IED WTSD-PWHUB, Руководство пользователя

Поделиться
Скачать
Atlas IED WTSD-PWHUB Скачать руководство пользователя страница 4

– 4 –

WTSD-PWHUB

Owner’s Manual

AtlasIED.com

TELEPHONE: (800) 876-3333

[email protected]

1601 JACK MCKAY BLVD. 

ENNIS, TEXAS 75119 U.S.A.

Rear Panel 

1. DC Power Input 

Each TSD that requires DC power comes with a 2 position connector for an external 
24VDC power supply (sold separately). Because of the TSD’s low power consumption, 
a single external power supply may power more than one TSD. Please refer to the 
specifications on current requirements in milliamps to match with the appropriate power 
supply. Please observe the polarity of the wiring to this connector. 

Note:

 It is acceptable 

to exceed the current requirements of the TSDs but NOT safe to use a power supply that 
is below the current requirement of the device.

2. Emergency Mute Override 

CC mutes balanced audio output from WTSD bus.

3. System Priority Relay 

Toggled by priority button on WTSD.

4. Auto Sleep Relay 

Toggled when sleep mode is active.

5. RJ45 WTSD Bus Input 

Connect a Cat5/6 cable to a WTSD RJ45 input marked “TO WTSD – PWBOB, PWHUB”.

6. Balanced Audio Output with Ground Lift

The WTSD-RJ45 bus carries the balanced audio mix signals from any WTSD that is 
connected in the signal. Connect a 3-way audio cable to the input of the amplifier.

7. Cable Management Retainer Points

Each TSD includes two cable retainer straps for securing the included cable management 
retainers. Remove one of the rear panel screws, align the panel hole with a retainer and 
firmly tighten the screws.

1

2

3

4

7

7

7

7

5

6

Содержание WTSD-PWHUB

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды