– 14 –
WTSD-MIX31K
Owner’s Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
3
. Reconnecting an Audio Source
• Turn the music level control all the way down (fully counter-clockwise).
• Press the Bluetooth music connect switch 1 time.
• The Bluetooth LED will blink. Select “Atlas MIX31” in the Bluetooth device settings.
• The Bluetooth LED will illuminate a steady state indicating the device and the
WTSD-MIX31 are connected.
• Before playing music, adjust the audio device level to
3
/
4
of the max source level.
Slowly turn the music level control to the desired listening level.
4. Out of Range Auto Connect
The WTSD-MIX31 has great range when compared to other Bluetooth devices due to the
antenna placement within the device. Achievable range for Bluetooth connection is 100ft
(33m) line of site. If the paired device goes out of the Bluetooth connection range from
the WTSD-MIX31 the following will happen:
• Intermittent music indicates the user needs to move closer to the WTSD-MIX31.
• If the user walks completely out of range, the WTSD-MIX31 will remain paired to the
last device for 1 minute looking to reconnect. After 30 seconds of searching, the
Bluetooth indicator will blink indicating it is about to be disconnected from the audio
source.
• After 1 minute, the Bluetooth LED will stop illuminating indicating the audio source was
disconnected. The Bluetooth connect switch will need to be pressed to re-connect.
