AP-S15HRIP / AP-S15IP / AP-S158IP
Owner’s Manual
– 16 –
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Accessing the Unit’s Web UI Interface
The AtlasIED AP-IP power distribution system’s GUI control panel is designed to be accessed via the LAN (Local Area Network) or local computer.
External software is not required for operation. The Web browser UI control interface software is embedded in the unit. Remote access to the device
can be set up through a VPN connection by working with the client or facility’s IT administrator.
Finding the Unit’s IP Address
There are two methods to find the unit’s IP address in DHCP mode, using the AP-LEDIP display or by using the discovery software.
Note:
All AtlasIED
AP-IP power distribution systems ship (factory default) in DHCP mode.
1.
AP-LEDIP IP Discovery
Using the AP-LEDIP external display is the fastest way to discover the IP Address. Plug the AP-LEDIP display into the unit’s display port. On the
display, press and hold down the viewing selection button until the IP address starts to scroll across the display. An IP address read out example
would be 192.168.1.138.
2.
Discovery Software
The user can search the LAN for connected units using a specified range of IP addresses within the LAN. To do so, the router’s range assignment
of IP address must be known. This IP address range must be entered into the AP-IP Discovery Software. An IT technician can provide the IP
address range assigned or, if the computer Network Interface Card (NIC) card is on the same LAN, this IP address can be selected and it will auto
fill the range of IP addresses that are needed to be scanned. The discovery software can be found at
www.atlasied.com/ip-enabled-power-distribution.
Magnetic display can be placed
outside of the door when closed.
Press and hold the button to display
the IP Address. Press once to
change the display data.