5
6. MAKE THE ELECTRIC
CONNECTIONS
WARNING:
To avoid possible electrical shock, be
sure electricity is turned off at the main fuse box
before wiring.
NOTE:
Installation of this fan requires that a
three-conductor cable with ground wire be run
between ceiling and wall outlet box, or the light
feature will not work.
If you feel you do not have enough electrical wiring
knowledge or experience, have your fan installed
by a licensed electrician.
1. Disconnect the power and remove the existing
wall plate and switch from the wall outlet box. (Fig.
9)
2. Set the knob on the wall switch to the 0 position.
3. Make wire connections as follows using the wire
nuts.
Figure 9
Figure 10
Figure 11
White (neutral)
White (motor)
Green or bare
copper (ground)
Ground
(green)
(Connect to
ground wire on
hanger bracket
if no house
ground wire
exists.)
Outlet box
Black (hot)
Red (hot)
Blue (for light)
Black (motor)
Line Voltage
(Black wire from main fuse box)
Ground
Black
Red
Black
White
Yellow/green
Blue
Wall outlet box
Wall switch
White
(Neutral)
Wall plate
Switch
Outlet box (Wall)
11
00
22
33
44
a. Connecting the wires from the fan to the
wires from the ceiling outlet box. (Fig. 10)
b. Connecting the wires from the switch to the
wires from the wall outlet box. (Fig. 11)
1. Connect the red wire form the ceiling outlet box
to the blue wire from the ceiling fan.
2. Connect the black wire from the ceiling outlet
box toe the black wire form the ceiling fan.
3. Connect the white wire from the ceiling outlet
box to the white wire from the ceiling fan.
4. Connect the green wires from the bracket and
down rod to the ground conductor wire on the
ceiling box.
1. Connect the red wire from the switch to the red wire from the wall outlet box.
2. Connect the brown wire form the switch to the black wire form the wall outlet box that feeds up to the
fan.
3. Connect the black wire from the switch to the black LINE VOLTAGE wire from the outlet box that feeds
back to the main fuse box.
4. Connect the yellow / green striped wire form the switch to the ground terminal on the wall outlet box.
