Instruction book
2920 1472 03
21
1.9.2 Display
The following is a typical example of the main screen, showing in short the status of the compressor:
Compressor Outlet
7.0 bar
Automatically Loaded
↓
Menu
Unload
F1 F2 F3
Fig. 1.11 Example of the main screen
1.9.3 Function keys (5-Fig. 1.10)
The keys are used:
-
to call up or program settings
-
to reset an active motor overload, shut-down or service message, or an emergency stop
-
to have access to all data collected by the regulator
The functions of the keys vary, depending on the displayed menu. The actual function is indicated on
the bottom line of the display just above the relevant key.
The most common functions are listed below:
Designation Function
Add
To add compressor start/stop commands (day/hour)
Back
To return to a previously shown option or menu
Cancel
To cancel a programmed setting when programming parameters
Delete
To delete compressor start/stop commands
Help
To find the Atlas Copco internet address
Limits
To show limits for a programmable setting
Load
To load the compressor manually
Mainscreen
To return from a menu to the main screen (Fig. 1.11)
Menu
Starting from the main screen (Fig. 1.11), to have access to submenus
Menu
Starting from a submenu, to return to a previous menu
Modify
To modify programmable settings
Program
To program modified settings
Reset
To reset a timer or message
Return
To return to a previously shown option or menu
Unload
To unload the compressor manually
Extra
To find information regarding the installed modules
Содержание ZR Series
Страница 63: ...Instruction book 2920 1472 03 63 Notes ...
Страница 64: ...Instruction book 2920 1472 03 64 Notes ...
