Atlas Copco XAS 185 KD7 T4 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 60

background image

- 54 -

Problem: After working some time, the unit stops through a shutdown switch.

Problem: Air and oil mist expelles from air filters immediately after stopping.

Problem: Compressor overheating.

Alternator precautions

1. Never reverse the polarity of the battery or the alternator.
2. Never break any alternator or battery connections while the engine is running.
3. When recharging the battery, disconnect it from the alternator. Before using booster cables to start the engine, be sure of the polarity and connect the batteries correctly.
4. Never operate the engine without the main or voltage sensing cables connected in the circuit.

Possible faults

Corrective actions

Engine oil pressure too low.

Refer to the engine instruction manual.

Compressor or engine overheating.

See corrective actions “Compressor overheating”.

Fuel tank contains insufficient fuel.

Fill fuel tank.

Low coolant level.

Top up cooling system.

Possible faults

Corrective actions

Check valve at element outlet.

Remove and inspect. Replace if necessary. Replace air filter elements and safety cartridges. Check the oil level

and add oil if necessary. Run the compressor for a few minutes, stop and recheck oil level.

Possible faults

Corrective actions

Insufficient compressor cooling.

Locate compressor away from walls; when banked with other compressors, leave space between them.

Oil cooler clogged externally.

Clean oil cooler. Refer to section Cleaning Coolers.

Oil cooler clogged internally.

Consult Atlas copco.

Oil filters clogged.

Replace oil filters.

Oil level too low.

Check oil level. Top up with recommended oil if necessary.

Thermostatic by-pass valve remains stuck in open position.

Remove valve and check for proper opening and closing. Replace if out of order.

Fan blade(s) broken.

Check and correct if necessary.

Oil separator element (OS) clogged.

Have element removed and inspected by an Atlas copco Service representative.

«
...
52
53
54
55
56
...
»

Содержание XAS 185 KD7 T4





























































Отзывы:

Нет отзывов

Похожие инструкции для XAS 185 KD7 T4

Бренд: Campbell Hausfeld Страницы: 10

Бренд: MESTIC Страницы: 20

Бренд: Rietschle Страницы: 40

Бренд: Rolair Страницы: 15

Бренд: King Canada Страницы: 3

Бренд: Johnson Controls Страницы: 60

Бренд: Craftsman Страницы: 52

TRAVELER BPTCA515

Бренд: Benjamin Heating products Страницы: 2

Бренд: Brownie’s Страницы: 46

Бренд: L&W Страницы: 123

Бренд: Champion Страницы: 32

Бренд: Paslode Страницы: 27

Бренд: Campbell Hausfeld Страницы: 4

Бренд: Focusrite Страницы: 10

Бренд: Diamond Страницы: 38

Бренд: YATO Страницы: 88

Бренд: California Air Tools Страницы: 17

Бренд: Gardner Denver Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды