Atlas Copco QAS 275-325, Инструкция по эксплуатации

Страница: 25 / 114

- 25 -
LOG list
The unit will keep an event log of the latest 30 events.
Events are:
– shutdowns
– service timer 1/2 reset
– unit type changes
Together with each event, the running hours at the
time of the event will be stored.
Remote start operation
Installation wirings:
– X25.1 & X25.2 to be wired for the remote start
switch.
– X25.3 & X25.4 to be wired for the remote
contactor (open/close).
Fail classes
All the activated alarms of the Qc1002™ have their
own pre-defined fail class.
All alarms are enabled according to one of these three
statuses:
– disabled alarm, no supervision of alarm (OFF).
– enabled alarm, supervision of alarm all the time
(ON).
– running alarm, only supervision when the
machine is running (RUN).
SPN190 "SPEED"
speed
FMI00 "HIGH LEVEL SHUTDOWN"
high level shutdown
FMI01 "LOW LEVEL SHUTDOWN"
low level shutdown
FMI15 "HIGH LEVEL WARNING"
high level warning
FMI16 "HIGH LEVEL ALARM"
high level alarm
FMI17 "LOW LEVEL WARNING"
low level warning
FMI18 "LOW LEVEL ALARM"
low level alarm
1 Controller type
2 Event number
3 Event
4 Running hours
Time: 00001h
EVENT LOG #04
Water
Qc1002
1
3
4
2