Atlas Copco QAC 1100 Sd, Инструкция по эксплуатации

Страница: 24 / 64

- 24 -
Qc4002™ Menu Description
Main view
The Screen has 4 different lines.The information
of the lines may be different, depending the line
you are using.There may be 4 main screens:SETUP
/ V3 / V2 / V1.
Setup screen
View V1
View V2
View V3
The user can scroll the screens with the scroll
buttons:
-
The SETUP screen displays the module name,
the software version, date and time.
- In V1 view the user can scroll 15 configurable
screens displaying the different measurements
of generator, bulbar and mains current.
- V2 view displays some generator measurements.
- V3 displays the type of application, the mode,
as well as some generator measurements. During
synchronization, V3 displays a synchronization
picture in the first line.
SETUP menu
It allows programming protection and control
parameters depending on the application.You can
do this, by scrolling the setup menu until the
appropriate parameter.Each parameter has a
specific channel number and it is listed in one of
the 4 SETUP main menus:
- afety and protection parameters (PROT):
Channels 1000 to 1999 (at intervals of 10).
- Control parameters (CTRL): Channels 2000
to 2999 (at intervals of 10).
- I/O setups:Channels 3000 to 5999 (at intervals
of 10).
- System parameters (SYST):Channels 6000 and
above (at intervals of 10).
By selecting SETUP, the following screen is
obtained:
The fourth line is the input selection for the menu
system.By depressing SEL button, the underlined
menu is accessed.
By selecting PROT, the following screen is displayed
(parameter example):