Atlas Copco PTS 916 Cd, Инструкция по эксплуатации

Страница: 40 / 74

40 Preliminary
PTS 916 Cd
5.1 Preventive maintenance schedule
The schedule contains a summary of the maintenance instructions.
Read the respective section before taking maintenance measures.
When servicing, replace all disengaged packings, e.g. gaskets, O-
rings, washers.
For engine maintenance refer to Engine Operation Manual.
The maintenance schedule has to be seen as a guideline for units
operating in a dusty environment typical to compressor
applications. The maintenance schedule can be adapted depending
on application, environment and quality of maintenance.
5.2 Service paks and kits
5.2.1 Service paks
Service paks include all genuine parts needed for normal
maintenance of both compressor and engine.
Service paks minimise downtime and keep your maintenance
budget low.
Order service paks at your local Atlas Copco dealer.
5.2.2 Service kits
A service kit is a collection of parts to fit a specific repair or
rebuilding task.
It guarantees that all necessary parts are replaced at the same time
which improves the uptime of the unit.
Atlas Copco service kits offer you all the benefits of genuine Atlas
Copco parts, save on administration costs and are offered at a
reduced price compared to the loose components.
The order numbers of the service paks and kits are listed in the
Atlas Copco Parts List (ASL).
5.3 Oil engine/compressor
High-quality, mineral, hydraulic or synthesized hydrocarbon oil
with rust and oxidation inhibitors, anti-foam and anti-wear
properties is recommended.
The viscosity grade should correspond to the ambient temperature
and ISO 3448, as follows.
5.3.1 Oil specifications
PAROIL from Atlas Copco is the ONLY oil tested and approved
for use in all engines built into Atlas Copco compressors and
generators.
Extensive laboratory and field endurance tests on Atlas Copco
equipment have proven PAROIL to match all lubrication demands
in varied conditions. It meets stringent quality control
specifications to ensure your equipment will run smoothly and
reliably.
The quality lubricant additives in PAROIL allow for extended oil
change intervals without any loss in performance or longevity.
PAROIL provides wear protection under extreme conditions.
Powerful oxidation resistance, high chemical stability and rust-
inhibiting additives help reduce corrosion, even within engines left
idle for extended periods.
PAROIL contains high quality anti-oxidants to control deposits,
sludge and contaminants that tend to build up under very high
temperatures.
PAROIL's detergent additives keep sludge forming particles in a
fine suspension instead of allowing them to clog your filter and
accumulate in the valve/rocker cover area.
PAROIL releases excess heat efficiently, whilst maintaining
excellent bore-polish protection to limit oil consumption.
PAROIL has an excellent Total Base Number (TBN) retention and
more alkalinity to control acid formation.
PAROIL prevents Soot build-up.
Contact Atlas Copco.
It is strongly recommended to use Atlas Copco
branded lubrication oils for both compressor and
engine.
Ambient temperature range Type of lubricant engine
between -25°C (-13°F) and -10°C
(14°F) -
between -10°C (14°F) and 30°C (86°F) PAROIL 15W40
between 30°C (86°F) and 50°C (122°F) PAROIL 15W40
Never mix synthetic with mineral oil.
If you want to use another brand of oil, consult Atlas
Copco for more information concerning the
recommended oil and service intervals.
!
!