Atlas Copco G2427 S250, Инструкция по эксплуатации продукта

Страница: 6 / 12

Safety and operating instructions EN G2427 S250
6
© Atlas Copco Industrial Technique AB - 9836 9908 00
Brand
General purpose
Bearings Air lubrication
BP Energrease LS-EP2 Energol E46
Castrol Spheerol EP L2
Esso Beacon EP2 Arox EP46
Q8 Rembrandt EP2 Chopin 46
Mobil Mobilegrease XHP 222 Almo oil 525
Shell Alvania EP2 Tonna R32
Texaco Multifak EP2 Aries 32
Molycote BR2 Plus
Overhaul
WARNING Overspeed could result in serious injury or death
►
If governor is used, check that correct governor is assembled. Careless handling may put it out of
order
►
Do not disassemble security parts, e.g. speed governor or overspeed shut-off. These parts must
be completely replaced when damaged
►
Always check the free speed of the machine after service. See Section Preparation before using
the die grinder
The entire machine should be checked regularly at six-month intervals. If it is in heavy duty service or not
running properly it should be taken out of service more often for inspection.
The strainer at the air inlet should be cleaned frequently to prevent clogging and decreased capacity.
Useful information
Log in to Atlas Copco www.atlascopco.com
You can find information concerning our products, accessories, spare parts and published matters on our
website.
Ergonomic guidelines
Consider your workstation as you read through this list of general ergonomic guidelines and see if you can
identify areas for improvement in posture, component placement, or work environment.
■ Take frequent breaks and change work positions frequently.
■ Adapt the workstation area to your needs and the work task.
■ Adjust for convenient reach range by determining where parts or tools should be located to avoid
static load.
■ Use workstation equipment such as tables and chairs appropriate for the work task.
■ Avoid work positions above shoulder level or with static holding during assembly operations.
■ When working above shoulder level, reduce the load on the static muscles by reducing the weight
of the tool, using for example torque arms, hose reels or weight balancers. You can also reduce
the load on the static muscles by holding the tool close to the body.
■ Make sure to take frequent breaks.
■ Avoid extreme arm or wrist postures, particularly for operations requiring a degree of force.
■ Adjust for convenient field of vision by minimizing movement of the eyes and head during the work
task.
■ Use the appropriate lighting for the work task.