G2412-1
EN
Product information
© Atlas Copco Industrial Technique AB - 9839 0484 01
7
Max output
0.35 kW (0.47 hp)
Motor type
Vane
Recommended hose size (d x l)
10 mm x 3 m (3/8 in x 10 ft)
Weight
0.5 kg (1.1 lb)
Service overview
Maintenance and service instructions
The service must only be done by authorized workshops or qualified service technicians.
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic fluoropolymer). Due to wear, there might be
PTFE particles inside the product. Heated PTFE can produce fumes which may cause polymer fume
fever with flu-like symptoms, especially when smoking contaminated tobacco.
Health and Safety recommendations for PTFE must be followed when handling vanes and other com-
ponents:
►
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open fire, glow or heat
►
Motor components must be washed with cleaning fluid and not blown clear with an air line
►
Wash your hands before starting any other activity
Replacement of vanes
Replace the vanes in the motor when a power drop of the tool is experienced. If the vanes are not re-
placed in time other motor parts may be damaged. For increased life length of the vanes use an oil lubri-
cator to dose oil into the air inlet.
Service recommendations
Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guidelines:
■
Clean appropriate parts accurately
■
Replace any defective or worn parts
