The removed cutter jaw pair (Q) remains secured on
the assembly rack.
Q
P
Fitting the cutter jaw pair
An assistant is required to attach the cutter jaw pair.
♦
Agree on hand signals with your assistant, to
enable him to help you place the carrier in the
proper position.
♦
Position the cutter casing fitted diagonally to the
cutter jaw pair fitted which is secured on the
assembly rack.
WARNING Hands and fingers being cut off
or hurt
Bores and surfaces can act like a pair of scissors
and cut off or injure parts of your body.
►
Never use your hands or fingers to check bores
or fitting surfaces.
The cutter casing is guided by the cutter jaw pair.
♦
Let an assistant guide you.
♦
Move the cutter casing (P) so that the drilled holes
in the cutter casing are flush with those of the
cutter jaw pair (Q).
Q
P
♦
Secure the carrier such that it cannot move
unexpectedly.
♦
Remove the hexagon head screw (M) from the
bolt cage (N) which fixes the main bearing pin (O).
♦
Fit the main bearing pin (O).
1.
2.
M
N
O
31
© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
INSTALLATION
CC 1700 U, 1700 S
