Safety Information
EP6PTI32 HR10-MT
4
© Atlas Copco Industrial Technique AB - 9834 4174 00
ment applies also to products containing so called Substances
of Very High Concern (the “Candidate List”). On 27 June
2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List.
In accordance with the above this is to inform you that cer-
tain mechanical components in the product may contain lead
metal. This is in compliance with current substance restric-
tion legislation and based on legit exemptions in the RoHS
Directive (2011/65/EU). Lead metal will not leak or mutate
from the product during normal use and the concentration of
lead metal in the complete product is well below the applica-
ble threshold limit. Please consider local requirements on the
disposal of lead at product end of life.
UK DECLARATION OF CONFORMITY
We,
Atlas Copco Industrial Technique AB
,
SE-105 23 STOCKHOLM SWEDEN, declare
under our sole responsibility that the product
(with name, type and serial number, see front
page) is in conformity with the following UK
Regulation(s):
S.I. 2008/1597
Designated Standards applied:
EN ISO 11148-6:2012
Authorities can request relevant technical information from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, SE-105 23 Stockholm Sweden
Stockholm, 1 December 2021
Carl von Schantz, Managing Director
Signature of issuer
Authorised Representative UK:
Atlas Copco Ltd
Swallowdale Lane
Hemel Hempstead
Hertfordshire HP2 7EA
Safety
WARNING Risk of Property Damage or Severe In-
jury
Ensure that you read, understand and follow all instruc-
tions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property
damage and/or severe bodily injury.
►
Read all Safety Information delivered together with
the different parts of the system.
►
Read all Product Instructions for installation, opera-
tion and maintenance of the different parts of the
system.
►
Read all locally legislated safety regulations regard-
ing the system and parts thereof.
►
Save all Safety Information and instructions for fu-
ture reference.
Statement of use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic.
No other use permitted. For professional use only.
Product specific instructions
Special precaution
• Check that the power socket is properly fastened.
• Replace the square drive retainer or socket if worn.
• Avoid unnecessary idling.
• When using a suspension yoke, make sure that it is in
good condition and correctly fastened.
Warning
WARNING Polymer hazard
The vanes in this product contain PTFE (a synthetic flu-
oropolymer). Due to wear, there might be PTFE parti-
cles inside the product. Heated PTFE can produce fumes
which may cause polymer fume fever with flu-like
symptoms, especially when smoking contaminated to-
bacco.
Health and Safety recommendations for PTFE must be
followed when handling vanes and other components:
►
Do not smoke when servicing this product
►
PTFE-particles must not come in contact with open
fire, glow or heat
►
Motor components must be washed with cleaning
fluid and not blown clear with an air line
►
Wash your hands before starting any other activity
Installation of vibrating tools
We recommend using a minimum length of 300 mm (12") of
flexible hose for compressed air between a vibrating tool and
the quick-action coupling.
