Atlantis V420-10W, Руководство пользователя

Страница: 18 / 29

18
Atlantis suggest to vistit the web site www.atlantis-
land.com in order to retrieve update manual, techsheet
and driver.
Before starting, take a few minutes to read this manual.
Read all of instructions and save this manual for later
reference.
Cautions in installation
 Do not install the camera in extreme temperature conditions. Do use the camera
under conditions where temperatures are within -10 ~+
℃
40 .
℃
 Do not install the camera under unstable lighting conditions. Severe lighting
change or flicker can cause the camera to work improperly.
 Do not install or use the camera in an environment where the humidity is high
(85%RH maximum). It can result in poor-quality image.
 Do not disassemble the camera. There are no user serviceable parts inside it.
Opening or removing the camera’s cover may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified personnel only.
 Do not touch the imaging surface of sensor. Use a soft cloth with alcohol to clean
the surface if it is touched accidentally.
 Ensure the supply voltage is correct before operation. Camera must be connected
to a surge protector at all times.
 Do not focus the camera on the sun directly.
 Handle this camera with care Avoid any shock or bumping of the camera.
Improper handling could damage the camera.
 Clean the front face to the pick-up device It is recommended that the pick-up
device surface be cleaned before lens installation or whenever the lens is
changed. Cleaning should be done by using a chamois, a very fine soft cloth, lens
tissue, or cotton tipped applicator and ethanol to carefully remove any fingerprint
or dust.
 Objects and liquid entry Never push objects of any kind into this camera as this
may touch dangerous voltage points of short out parts that could result in a fire
or electric shock. Never spill any kind of liquid on the video product.
 Damage requiring service unplugs this video product from the wall outlet and
refers service to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been dropped or the cabinet has been damaged.