Atlantis +Power 302 AV Kit, Многоязычное руководство

Страница: 37 / 56

37
SYNC Press for 1-3 seconds to create or join a HomePlug AV network. It can
also be used to reset the Private Network Name to a random key.
Press the
Sync Button of device for 6-8 seconds to make sure that it is
detached completely from any possible network group.
RESET Press and hold this button to for 10 seconds to reset device to factory
default settings. You will see the device’s all LEDs are off and restart. The
device’s setting resets to the “factory defaults”.
The Power, Ethernet and Data indicators blink on and off when the
device is powered on. At that moment, the Ethernet indicator is
green, and the Power and Data indicators are orange.
Do not plug the device into a power strip or surge protector because
these devices may consist of filter and impair signal. Also avoid
plugging the device right next to noisy sources such as cell phone
charger, Halogen light, Energy saving bulb, noisy desktop computer,
vacuum cleaner, etc. Both cases result in poor transmission speed.
The “PWR“ LED indicator will blink in standby mode. It will
automatically get into standby mode, if the Ethernet-link is lost for
600 seconds. If you unplug the Ethernet cable, it will get into standby
mode after 600 seconds. Under standby mode, DATA and ETH LEDs
will both be off, Power indicator blinks wvery 4 seconds (in orange).
For a device which already belongs to a network group is to join with
a different network group, that device has to be ungrouped from its
current attached group first. Press the Sync Button of device A for
6-8 seconds to make sure that it is detached completely from any
possible network group.
Due to the incompatibility of HomePlug AV 200 with HomePlug 1.0
devices, the presence of the HomePlug 1.0 devices within the
powerline network will thus reduce the performance of your powerline
network.