9
1.2 Configurazione di Default
Prima di iniziare la configurazione del NetServer è necessario conoscere i settaggi di
default.
Password:
LAN IP Address:
Client DHCP Attivo
, se non è disponibile un server
DHCP il dispositivo utilizzerà il seguente indirizzo:
169.254.10.10
2.
CONTENUTO DELLA CONFEZIONE
Prima dell’utilizzo, verificare che la scatola contenga i seguenti elementi:
NetServer
Alimentatore AC-DC (5V@2A)
Cavo RJ45 CAT 5
Una guida rapida multilingua (Italiano, Inglese)
Un Cd-Rom contenente utility e manuale dell’utente (Italiano, Inglese)
Coupon di Garanzia e WEEE
Nel caso in cui il contenuto non sia quello sovradescritto, contattare il
proprio rivenditore immediatamente.
3
. INSTALLAZIONE HARDWARE
Questa sezione descrive la procedura di installazione hardware del dispositivo.
Collegare il cavo USB della stampante alla porta USB del NetServer.
Collegare un capo del cavo Ethernet allo Switch (Router o altro) della
LAN e l’altro capo alla presa LAN del NetServer.
Collegare prima l’alimentatore alla presa elettrica e dopo qualche
secondo inserire il jack nel connettore del NetServer.
A questo punto il dispositivo è correttamente collegato.
LED
Status
PWR
Acceso verde fisso
LAN ACT
Acceso verde fisso o lampeggiante in caso di invio/ricezione
dati
LAN Link
Acceso giallo fisso
Содержание NetServer PSU1
Страница 1: ......
Страница 15: ...15 Impostazione Server Verr visualizzata la seguente schermata...
Страница 49: ...Via S Antonio 8 10 Lainate MI Italy info atlantis land com...