Atlantis Hostpower 02 Series, Руководство пользователя

Страница: 28 / 63

ENG
28
APPENDIX A: TROUBLE SHOOTING & SUPPORT
If the UPS is not functioning properly, you can refer first to this chapter for simple
troubleshooting before contacting your reseller. This could save you time and effort
but if the problem persist, then consult your service provider.
A.1.1 UPS
The LED and the acoustic signals are a profit tool to individualize immediately possible
problems
Situation Check Items Solution
Mains normal but Line
(AC MODE) LED is not
on. 1. Is the power switch on?
2. Check the Fuse/ICS?
3. Is the power cord
loose?
1. Press Main Switch on.
2. Change fuse with same
rating. Check ICS.
3. Re-connect the power
cord properly.
Alarm buzzer beeps
continuously when
Utility is normal.
1. Check the load status 1. Remove some uncritical
load.
2. Remove some uncritical
load and re-switch on
the UPS.
No LEDs display on the
front panel 1. Recharge the UPS for
24 hours.
2. Contact Atlantis.
UPS does not provide
expected backup time. 1. The UPS’s battery is
weak due to recent
outage.
2. The UPS’s battery is
near the end of its
service life.
1. Charge the battery.
2. If the battery is near
the end of its service
life, you have to replace
the battery.
Do this device support
the
AutoRestart
function?
Yes. When battery run out of time, the UPS will be shut
down. But when AC recovery, the UPS will be auto
restart and charge the battery.
A.1.2 ViewPower
Situation Solution