Atlantis Land NetFly PCI WN, Многоязычное руководство

Страница: 55 / 143

55
4.3 Using the Configuration Utility
When the Wireless LAN Adapter was installed, you will see the icon on the Windows
task bar. The user can configure the wireless settings using the Wireless Adapter
Configuration Utility. Double-click the utility icon that appears in the taskbar
ICON SIGNAL QUALITY
Excellent
Good
Weak
Not connected yet
Device not recognized
When You click on this icon in the Windows task bar You can see 4 different links:
 Launch Config Utilities
 Switch to AP mode
 Open Diagnostic Testing Mode
 Exit
In windows XP, it provides wireless configuration utility
named
windows zero configuration which provides basic
configuration function for WirlessUSB Adapter. Currently,
Ralink’ s utility provides WPA-PSK supplicant’s functionality. If
user required WPA function.
Please select WZC as main utility. To make it easier for
user to select the correct utility. RaConfig will let user
make the selection when it first ran after XP boot. Click the