Atlantis Land I-Storm A02-RA2, Руководство по эксплуатации продукта

Страница: 28 / 46

AtlantisLand I-Storm Lan Router ADSL
26
All user-defined routes retained in the CPE memory, regardless if they are already in the
Routing Table, are displayed on the same Route Table page.
All user defined route entries kept in the CPE memory during run time are saved to flash
when the user chooses to save and reboot the CPE. When CPE restarts, it reloads all saved
user-defined routes to the CPE memory and tries to apply to the system.
A user-defined route entry is added to the Routing Table whenever the system provides an
environment that makes the route entry applicable. It is removed from the Routing Table
whenever the route entry becomes not applicable. e.g. If the route entry’s Gateway is
associated with a dynamic Network Interface but the connection is not established, then the
route entry does not appear in the Routing Table. When that interface comes up later, the
route entry is then added.
If the selected Network Interface is static or is dynamic and the connection is already up, then
the route entry appears in the Routing Table immediately. If there is a Gateway associated
with the selected Network Interface, then that Gateway’s IP address appears in the Gateway
field of the route entry.
If the selected Network Interface is dynamic but the connection is not established, then the
route entry does not appear in the Routing Table. When the interface comes up later, the
route entry is then added.
System Default Gateway Configuration
The system-wide Default Gateway now provides three options: Auto, User-selected Network
Interface, and None.
None: This field allows the user to choose to have no Default Gateway in the CPE
Auto: This field allows the user to select the CPE to automatically decide the Default
User-selected Network Interface: This field allows user to select a Network Interface from a
list (PVCs, PPP Sessions, USB and LAN). This option lets the user to associate the system-
wide Default Gateway to a Network Interface, static or dynamic, and provides a way to fix
the Default Gateway to a dynamic Network Interface before the interface is established.
Route Configuration
Destination: This field allows the user to enter the remote network or host IP address for the
static routing.
Netmask: This field allows the user to enter the Subnet Mask for the static routing.
Gateway: This field allows the user to enter the IP address of the gateway device that allows
the router to contact the remote network or the host for Specified IP or select an Interface for
the Gateway.
Manually Configured Routes: This field displays the static route entries entered by the user.
Learned MAC Table
The Learned MAC Table page shows the current learned Bridge MAC table.