I-Fly Wireless Access Point
2
For more detailed instructions on configuring and using the I-
Storm Lan Router ADSL, please refer to the online manual.
1.1 Package contents
Make sure that you have the following items:
•
I-Fly Wireless Access Point
•
Network cable (CAT 5)
•
Power Adapter AC-DC (5V, 2A)
•
CD-ROM (with manual, software and driver)
•
This Quick Start Guide
If any of the above items are missing, please contact your reseller.
1.2 Cabling
Connect to RJ45 ports by an Ethernet cable your PCs or Switch.
Finally connect the Adapter to power inlet. Now the I-Fly AP will
enter a self-test phase for about ten seconds. After this phase a
solid light (POWER Led) indicates a proper connection to the
power supply.Now you should see the LAN (WLAN) is solid or
blinking.