DiskMaster
Where solutions begin
ISO 9001:2000 Certified Company
Raid Settings (Rebuilding)
When using RAID 1 and one of the drives has failed, the faulty HDD has to
be replaced and the RAID 1 array rebuilt.
1. Login and go to the RAID Setting (
Maintenance->Raid Settings
) menu
to check the disk status. If there is a problem, it will show which drive has to
be replaced.
2. Turn off the power, remove the power supply from the wall socket and
replace the a new HDD. Please refer to the table below for the HDD
allocations.
3. Turn on the power and go to the RAID setting menu. Add the new drive
and the Dual Giga NAS will start to rebuild your RAID array.
4. Depending on the capacity, this will take several hours. Do not turn off
the power or interrupt the system in any other way. The HDD LED will be
ON while the RAID array is being rebuilt.
Содержание DiskMaster NASF301D
Страница 14: ...DiskMaster Where solutions begin ISO 9001 2000 Certified Company...
Страница 15: ...DiskMaster Where solutions begin ISO 9001 2000 Certified Company...
Страница 24: ...DiskMaster Where solutions begin ISO 9001 2000 Certified Company Set time zone current Date and Time Click Next...
Страница 59: ...DiskMaster Where solutions begin ISO 9001 2000 Certified Company...