Atlantis Land A05-15AM-E01, Руководство пользователя

Страница: 12 / 44

ENGLISH
A05-15AM-E01_X02 12 - 44
5.1 Factory Preset Timings
Timing
Horizontal
Frequency
(KHz) Vertical
Frequency
(Hz) Sync
Polarity
(H/V)
VGA 720 X 400 31.467 70.082 - / +
VESA 640 X 480 31.469 59.940 - / -
VESA 640 X 480 37.861 72.809 - / -
VESA 640 X 480 37.500 75.000 - / -
VESA 800 X 600 37.879 60.317 + / +
VESA 800 X 600 48.077 72.188 + / +
VESA 800 X 600 46.875 75.000 + / +
VESA 1024 X 768 48.363 60.004 - / -
VESA 1024 X 768 56.476 70.069 - / -
VESA 1024 X 768 60.023 75.029 + / +
6 Signal Connector Pin-outs
To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector.
6.1 15-pin Mini D-type Male Connector
1 Red Video 6 Red Ground 11 Ground
2 Green Video 7 Green Ground 12 Serial Data/I/O
3 Blue Video 8 Blue Ground 13 H. Sync
4 Ground 9 No Connection 14 V. Sync
5 No Connection 10 Sync Ground 15 Serial Clock Input
7
Troubleshooting
CAUTION : Never disassemble the monitor or attempt to service the product yourself. This will
also void warranty. Contact the Atlantis Help Desk Center (see the Warranty Certificate)
•
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on. Turn off the power and check the monitor’s
power cord, AC adapter, and signal cable for proper connection.
•
Appear the “ No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
•
Appear the “ Input Not the Supported"
Input signal are insuperable, refer the “Video Modes”
•
The appearance is not at the screen center.