background image

                                            

 Wireless Multi-Function Access Point  

 

A02-AP-W54                                                   Pag. 8  

CHAPTER 3: Configuration 

The Wireless Multi-Function Access Point  can be configured with your Web 
browser.  The web browser is included as a standard application in the following 
operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc. 
The product provides a very easy and user-friendly interface for configuration. 

3.1 Before Configuration 

This section describes the configuration required by LAN-attached PCs that 
communicate with the Wireless Multi-Function Access Point, either to configure 
the device or for network access. These PCs must have an Ethernet interface (or 
wireless adapter) installed properly, be connected to the Wireless Multi-Function 
Access Point either directly or through an external repeater hub or by wireless, 
and have TCP/IP installed and configured to obtain an IP address through a 
DHCP server or a fixed IP address that  must  be  in  the  same subnet of the 
Wireless Multi-Function Access Point. The default IP address of the Wireless 
Multi-Function Access Point is 192.168.1.100 and subnet mask is 255.255.255.0.  
Please follow the steps below for PC’s network environment installation. First of 
all, please check your PC’s network components. The TCP/IP protocol stack and 
Ethernet network adapter must be installed. If not, please refer to MS Windows 
related manuals. 
 

 

Any TCP/IP capable workstation can be used to communicate 
with or through the Wireless Multi-Function Access Point to  
configure other types of workstations, please consult the 
manufacturer’s documentation.

 

 

 
 
 

Содержание A02-AP-W54
















































Отзывы: