background image

2

Warning

 Attention surface très chaude. Caution hot surface. 

CAUTION

: Certain parts of this product can become 

very hot and cause burns.  Particular attention must 

be paid in the presence of children and vulnerable 

individuals.

 

-

This appliance must be kept away from children under the age of 3, 

unless under constant supervision .

 

-

Children aged between 3 and 8 may only switch the appliance on or off, 

on condition that it is place or installed in a normal, intended position 

and that the children are supervised or have received instructions 

concerning the safe use of the appliance and clearly understand the 

potential hazards. Children aged between 3 and 8 must not connect, 

adjust or clean the appliance or perform the user maintenance.

 

-

This unit can be used by children who are at least 8 years old and by 

people with reduced physical, sensory or mental capacities or people 

lacking experience or knowledge if they are correctly supervised or 

if they have been given and have understood instructions concerning 

safe use of the unit. Children must not play with the appliance. The 

unit must not be cleaned or serviced by children without supervision .

 

-

This appliance must only be connected by an authorised person in 

accordance with the rules and standards in force.

 

-

The heater must not be placed just below a power outlet .

 

-

To avoid all dangers for very young children, it is recommended that 

this appliance be installed such that the lowest heated bar is at least 

600 mm above the ground .

 

-

If the power cable is damaged, it must be replaced by the manufacturer, 

its  customer  service  or  a  professional  with  similar  qualification  to 

prevent any hazards .

Attention :

Surface très

chaude

Caution
hot surface

Содержание SENSIS





















Отзывы: