Atlantic Doris mixte Ventilo Series, Руководство пользователя и инструкция по установке, Страница: 17 / 18

W
ARNING
I
N CASE OF PROBLEM
- When filling a Mixed appliance, the hot water circuit must necessarily be used to allow the fluid to expand
in the heating circuit.
- Prevent children from climbing on the device.
- Any intervention on the electrical parts must be performed by skilled staff.
- Do not insert objects or paper in the device.
- Upon first warming, a slight smell may appear, due to the evacuation of compounds used during the devi-
ce’s manufacturing.
- The casing may be hot, even when the device is off.
Problem Check
The device does not heat
- Check that the premise circuit breakers are triggered or that the
shedder (if you have one) has not interrupted the device’s power sup-
ply.
- Check the air temperature in the room.
- Switch the device off, then back on (
switch):
If the indicator blinks 3 times: the measurement probe is
damaged. Call your electrician to ensure its replacement.
If the
indicator blinks 5 times: power surge in device supply.
Power off the device (fuse, circuit breaker…), and call your elec-
trician.
The heating device
heats constantly - Check that the device is not located in a draft or that the temperatu-
re setting has not been altered.
The fan stops prematurely
- Check that the air inlet grills are not blocked. Proceed to clean
them if necessary (refer to the Filter paragraph).
- Check that the room temperature has not reached too high a level. In
this case, fan stoppage is normal. Just wait for the ambient temperatu-
re to drop before reusing the Turbo mode.
- If you live at an altitude of more than 1000m, because the air is less
dense this may cause the item to rise in temperature more quickly.
This may therefore become a repetitive problem (without having any
major effect on the service life of the machine’s components).
In all cases, follow the procedure below to restart the machine:
Switch off the machine (switch ).
Wait at least 10 minutes
Restart the machine (switch ).
- When ventilating the room, stop the device by setting the switch to the Arrêt position.
- If you leave for several hours, lower the temperature.
Leaving for: Less than 24 hours :do not touch the controls.
More than 24 hours or during summer :set the temperature knob to .
R
ECOMMENDATIONS OF USE