7
Instruction Manual
Front Panel Control
HF (High Frequency) Level Control
This control adjusts the relative level of high frequency
output to compensate for varying room acoustics or
placement behind a screen.
“+” is for absorptive, acoustically “dead” rooms (or when
the speaker is behind a movie screen). Use this position
to increase the HF level and restore the proper sparkle and liveliness to
the sound.
“0” is for rooms of average absorptive characteristics.
“-“ should be used in rooms that are highly reflective, with hard floors
and exposed windows.
The setting of the HF control is mostly a matter of personal taste, so try it
in all three positions and see which one is preferred.
Should you have any questions or problems please feel free to contact us at
781-762-6300 or through our web site, www.atlantictechnology.com.
Specifications
IWTS-4 LCR
Type
2-way
Drivers
Woofer 6 ½” (165mm) GLH*
Tweeter 1" (25mm) LRT soft dome
Frequency Response
57Hz – 20kHz ±3dB
Nominal Impedance
6 Ohms
Crossover Frequency
2.4kHz, 3rd order
Sensitivity
88dB
Recommended Power
10 – 100 Watts RMS
Overall Dimensions
8 ¾ x 12
1
⁄
8
x 3 ¾"
(W x H x D)
223 x 308 x 96mm
Cutout Dimensions
7
5
⁄
8
x 11”
(W x H)
194 x 280mm
Net Weight
6lbs; 2.7kg each
*Graphite Loaded Homopolymer
Specifications are those in effect at the time of printing. Atlantic Technology reserves the right
to change specifications or appearance at any time without notice.
Front Panel Controls