Instruction Manual
7
Speaker Installation
NOTE:
We always recommend a professional be involved in the installation of the
IW-155SR.
Installation of the IW-155SR in New Construction with Optional
New Construction Bracket
For new construction, we highly recommend that
you use the optional IN-NC-155 New Construc-
tion Bracket.
The lip on the New Construction Bracket must
face outwards into the room. Wallboard is then
installed up to the lip, leaving a perfectly-defined
mounting hole for the speakers. Use a level to get
it straight; this can't be fixed later.
Installation of the IW-155SR in Existing Construction
The IW-155SR can be easily mounted in most
any standard wall material, from ½ to 1½ inches
(12 to 38mm) thick. The IW-155SR rotating wall
clamps firmly fix it to the wall surface after the
proper cutout has been made.
An important precaution to take before
mounting:
Keep the top and bottom of the actual mounting
hole at least 1½ inches (38mm) away from beams or obstructions to ensure that the clamps
have adequate room to rotate. A crossbrace or other obstruction that’s too close will stop
them from properly doing their job.
DIPOLE
DIPOLE
BIPOLE
BIPOLE
Speaker Installation
