○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
A
TECHNOLOGY
tlantic
Model 162 PBM High Performance Subwoofer
9
Subwoofer Troubleshooting Guide
Once your subwoofer has been set up, you should have many years of maintenance-free
enjoyment from your system. However, if you should encounter a problem, refer to the
following guide to help you find the solution. If a problem persists, you should contact
your local authorized Atlantic Technology dealer.
Problem
Possible Cause
Possible Solution
No bass output
AC power cord unplugged or plugged into a
Plug into a working outlet.
non-working outlet.
Input cables not securely connected or defective.
Check all connections, then try another input cable.
Audible buzz
Input cable not securely connected or defective.
Check all connections, then try another input cable.
or hum
Single HI LEVEL input connected to the RIGHT channel.
Connect to the LEFT input channel.
Ground loop through antenna or cable TV system input.
Test by disconnecting antenna and/or cable system input leads.
If hum goes away, install isolation balun(s) at that point.
More than one
More than one source is playing.
All the subwoofer’s inputs are active at all times. Turn off
source audible
unwanted source.
Weak bass
Subwoofer too far from the wall.
Move the subwoofer closer to a wall or corner.
OUTPUT LEVEL CONTROL set too low.
Turn control up somewhat.
Weak bass: vague
Input source connected to HI LEVEL inputs is wired
Check speaker wire connections and reconnect in proper
stereo image
out of phase.
phase.
