STEP 4
Page 5 of 6
ASSEMBLED CRIB
WARNING
!
ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 in (690 mm)
IN WIDTH, BY 51 5/8 in (1310mm) IN LENGTH, AND AT LEAST 4 in (100mm)
IN THICKNESS, BUT NOT EXCEEDING 6 in (150mm).
Your Windsor Crib is now ready for use.
It is important that you recheck all screws making sure they are tight
and that all parts are secure before use and periodically to ensure safety.
WARNING
!
WARNING
NOTE : Spring ( 06 ) must
be installed in lowest
position as shown.
When use as a Crib has been completed,you have the option to convert the Crib to a Toddler Bed.
Remove Footboard ( 03 ) that is attached to front posts ( left + right). Install Toddler
Guard Rail ( 05 ),use Wood Dowel ( D ), JCB M6 X 110mm ( B ) and Barrel Nuts ( E ) as shown.
Conversion to a Toddler Bed
!
Assembling by Adult
JCB M6 X 110mm
( 4 1/4” )
Allen Key
B
F
D
E
Wooden Dowel
10 X 40mm
Barrel Nut
BACK VIEW
E
D
Locator hole will
receive ( D )
Locator hole will
receive ( E )
Tighten with the Allen Key ( F ).
B
B
F
05
WINDSOR CRIB
