Atlanta ATH-723, Инструкция по эксплуатации

Страница: 5 / 20

5
EN
3-7
RUS
8-12
UA
13-17
INSTRUCTION MANUAL
3. Fill the kettle with water through the top open. Water volume shall be not less
than 0.5 l , but not more than the volume marked at the scale as «MAX».
4. Tightly close the top of the kettle otherwise the kettle won’t switch off when
boiling.
5. Put the kettle on the base plugged in. The design of the kettle makes it possible
to put it on the base from any side.
6. Push ON pushbutton (С). Operating indicator is ON (I).
7. Wait till water is boiling. The kettle will switch off automatically. Boiling process
may be stopped manually at any time. In order to make repeated boiling, it is
necessary to wait a while, till the kettle get cold a little and heat-sensing device
arrives to home position.
8. Don’t open the top in the process of boiling and immediately after in order to
avoid thermal injury.
NOTES
1. Never fill the kettle with any liquid except water.
2. Be money-saving: don’t boil more water than you need. This will reduce power
consumption and increase the operating life of the kettle.
3. Condensate may appear in the kettle in the course of operation.
4. Never heat the kettle on gas or electric stove.
5. The kettle shall be used only with the base completed with the supply.
6. The manufacturer reserves the right to make change in the kettle’s design.
SAFETY MEASURES
• The kettle operates from power supply; power supply technical characteristics
are specified in the manual.
• The kettle must be used only upright. Never use it on uneven and non-heat-
resistant surface.
• Use a separate socket for the kettle.
• The device is not intended for use by persons (including children) with reduced
physical, sensory or mental ability or if they have no experience or knowledge, if
they are not under control or not instructed on the use of the instrument the person
responsible for their safety.
• If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
• To avoid the danger, if the power cord has been damaged, it should be replaced
by the manufacturer, its agent or similar qualified person.
• As surface temperature of the kettle can be over 60°С, do not touch it except for
a handle and buttons.