Atlanta ATH-6163, Инструкция по эксплуатации

Страница: 9 / 24

9
INSTRUCTION MANUAL
Defect signs Probable cause Remedy
The scales do not response
to button pressing or do not
get activated Electronic or static error.
Low batteries Remove batteries. Wait
several secons and then
reinstall the batteries.
Make sure that batteries are
not low
The symbol «_____» is not
displayed Sensor indications are out
of measurement zone Do not measure the weight
of less than five kilograms
«LO» Batteries are low Replace batteries
Symbol «Err» or «O-Ld» is
displayed The scales were not
activated by short touch-
down. Maximal load of 180
kg was exceeded Touch slightly the working
surface of the scales for a
short moment
(activate them) and repeat
the measurement.
You may weigh on the scales
only the weight, which does
not exceed the specified
maximal load.
Repeat the measurement,
and when measuring, stand
still without motion
Symbol «Err» is displayed Your weight is not
determined, because during
measurement you stood
unevenly or you moved Repeat the measurement,
and when measuring, stand
still without motion
Symbol «Err» is displayed The content of the body
analysed is beyond the
measurement limits, your
feet are in contact with
each other, or poor contact
of your feet with analysing
plates Repeat the measurement,
having raised on the working
surface of the scales with
your bare feet. If necessary,
moisten slightly the bottom
surface of your feet.
Your feet should be not in
contact
TROUBLESHOOTING