Atlanta ATH-487N, Инструкция по эксплуатации

Страница: 6 / 24

6
INSTRUCTION MANUAL
11. After you have finished ironing, unplug the iron and place it in the vertical position
to cool down.
12. After the iron has cooled down, get rest water out of tank by turning it down filling
openings and store it away. Do not wind or twist the power supply cord.
NOTES
• Do not heat the iron on a gas or electric cooker.
• When first in use you may notice a characteristic odour of burnt tool lubricant.
• The iron may drip water in case you set the temperature controller (H) to less
than the position « » and try to use any steam function.
• The thermostat position «MAX» is designed for active use of the steam function.
You should not use this option if steam control is set to less than half.
• We do not recommend using distilled water is very high chemical purity in mind
the theoretical possibility of overheating. The such kind of water can reach level
above the boiling point. If you doubt the degree of chemical purity of water, just add
a 20% of ordinary tap water.
• During operation, the iron pressing the button a couple extra(E) lead to the release
of portions of steam, not water only when prescribed by the regulator temperature
(H) in position « ».
• If you use non-distilled water through a time of iron instead of the steam will go
with a mixture of water insoluble salts: it can spoil your things and became reason of
overheating iron.