Atlanta ATH-486, Инструкция по эксплуатации

Страница: 5 / 24

5
INSTRUCTION MANUAL
OPERATING THE IRON
1. Place the iron in a vertical position on an even dry heat-resistant anti-slip
surface, as close to the outlet as possible.
2. Turn the steam regulator (D) to position «0».
3. If you intend to use the steam or spray, pour in the water inlet(C) to 240 ml of soft
or distilled water (but no more than the mark «max»). The iron must be disconnected
from the power when you fill it.
4. Set the desirable heat level with the heat regulator (D) in accordance with the tag
of the piece of clothe you are going to iron. First iron clothes that require minimum
heat level, and then proceed to clothes that require maximum heat level.
5. Plug the iron. The heat indicator (I) will light up.
6. As soon as the heat indicator (I) goes off, the iron is heated to the required
temperature and you can start ironing.
7. Do not let the soleplate come in contact with hard objects (buttons, fasteners
and so on).
8. Press the spray button (F) to moisten the thing you going ironing.
9. Set the temperature regulator (H) to position « » to use the steam function.
Then you should use permanent team regulator (D) or let off steam in batches by
turbo steam button (I) at intervals of not less than 4 seconds between bursts. At the
same time tag of things must allow the use of this feature.
10. After you have finished ironing, unplug the iron and place it in the vertical position
to cool down.
11. After the iron has cooled down, get rest water out of tank by turning it down filling
openings and store it away. Do not wind or twist the power supply cord.