Atlanta ATH-3176, Инструкция по эксплуатации, Страница: 7 / 24

7
INSTRUCTION MANUAL
CLEANING AND HANDLING
• The blender needs regular cleaning from the remains of products.
• Unplug the blender and let it cool down, then wipe the surface of the case using
the moist rag. Do not use chemical or abrasive detergents to clean the appliance as
it may damage its surface.
• Use the warm water to wash the bowl and nozzles but not electrical part.
• Do not clean the blender with instruments.
• Never put the appliance into water or other liquid.
INSTRUCTIONS FOR ENVIRONMENTAL PROTECTION
The old appliances are the assemblage of technical materials
and therefore cannot be utilized with household rubbish! For this
reason, we would kindly ask you to support us in resource saving
and environmental protection and deliver this appliance into a
utilization reception center (if there is one).
NOTES
1. Do not insert the blender blade deeper than half the length of the shaft. Do
not remove the blender from mixing or blending products until it completely stops.
Always check the quantity of the ready-made product do not exceed the maximum
mark.
2. Prevent the motor from overheating; while loading viscous and thick products
take more breaks.
3. The metal blender nozzle may also operate with hot products up to 50° С. Other
nozzles and bowls are not intended for hot products.
4. The blender should be used only with components included in the set.
5. Ice, coffee and other very hard products may be ground in any hard bowls: the
bowls included in the set are not intended for such purpose.
6. The manufacturer reserves the right to make any additional changes in the
blender construction.