Atlanta 4500A, Техническое руководство и перечень запасных частей

Страница: 42 / 166

Technical Manual & Parts Lists
34
2.2.7 Pattern Settings Screen
This screen allows the operator to adjust pattern parameters.
Sew Head Speeds
Each Sew Head has a
trackbar that allows the
operator to change the needle
speed. The maximum setting
is factory set at 2400 RPM
and the minimum setting is
zero (meaning that the motor
may be enabled but stopped).
Puller Override Speed
This parameter allows the operator to override the
Puller speed from the setting calculated using the
pattern shape. The normal setting is “0”Which shuts
off the override request and allows the system to
automatically control the PULLER speed.
Note: Pattern distortion may occur using the
override feature.
Y01 (-Y02) Scale / Offset / Shift
These parameters control the shape of the pattern
for each Sew Head in real time.
A detailed explanation may be found in section
2.2.8 “Pattern Settings Detail”
Path Speed
This parameter overrides
the virtual Master axis path
speed setting that is
calculated based on the
pattern shape.
This is an advanced feature
and is not normally
modified above 1.30 or
below 0.10 from the
calculated setting.
The normal setting is “1.0”
to indicate that the system
will automatically calculate
the Master speed.