Atlanta 3300LA Скачать руководство пользователя страница 14

Страница: 14 / 110

Technical Manual & Parts Lists

Repair

Replacement Parts

We cannot accept any liability whatsoever for damage due to the use of parts made by other

manufacturers or due to unqualified repair or modification of the machine.

Repair, Electrical

The power supply must be switched off (master switch off) and secured so that it cannot be switched on

again inadvertently before starting any work on live parts.

Those parts of the machine and plant on which inspection, maintenance or repair work is to be carried

out must be isolated from the power supply, if specified. The isolated parts must first be checked to

determine that they are truly de-energized before being grounded and short-circuited. Adjacent live parts

must also be isolated.

The protective measures implemented (e.g. grounding resistance) must be tested before restarting the

machine after all assembly or repair work on electric parts.

Signal generators (limit switches) and other electrical parts on the safety mechanisms must not be

removed or bypassed. Only use original fuses or circuit overloads with the specified current rating. The

machine must be switched off immediately if a fault develops in the electrical power supply.

The electrical equipment of our machines must be checked at regular intervals and any defects found

must be remedied immediately.

If it is necessary to carry out work on live parts, a second person should be on hand to operate the

emergency OFF switch or master switch with voltage release in the event of an emergency. The working

area should be cordoned off and marked by a warning sign. Only use electrically insulated tools.

Ventilation/Hazardous Gases

It is the end users responsibility to ensure adequate ventilation is provided to exhaust any and all

noxious or hazardous gases that may be present in the working environment.

Hydraulic and Pneumatic Systems

Work on hydraulic or pneumatic equipment shall only be carried out by persons with training,

knowledge and experience of hydraulic systems. Pressure lines shall be depressurized before starting

any repair work.

General Liability

Liability for machine damage and personal injury is extinguished completely if any unauthorized

conversions or modifications are undertaken. The machine must not be modified, enlarged or converted

in any way capable of affecting safety without the manufacturer's prior approval.

Starting Machine Movements

Read the Instruction Manual carefully to establish which keys and functions start machine movements.

Содержание 3300LA















































































































Результаты поиска

Содержание 3300LA

Отзывы:

Похожие инструкции для 3300LA

Бренды по названию

Популярные бренды

Atlanta 3300LA, Техническое руководство и перечень запасных частей

Результаты поиска

Содержание 3300LA

Отзывы:

Похожие инструкции для 3300LA

Бренды по названию

Популярные бренды