Atlanta Attachment Company 1393E Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 60

Atlanta Attachment Company 1393E Скачать руководство пользователя страница 31

Technical Manual & Parts Lists

5- BORDER CUT LENGTH

This  is  to  set  the  length  of  border  to  be  produced.
When this length is reached the border will be cross
cut. The units are in inches.

After  selecting  a  number  field  a  number  pad  will
come up.  Enter the desired number and select ENT
to enter that number in the desired location.

6- BLADE ADJUST START

When you press this button it will start blinking and
the  slitters  will  disable  and  the  material  will  feed
forward  until  the  dancer  bar  reaches  the  upper
sensor.  At this position the operator will have access via the front access doors to reposition the slitter
blades as desired.  Note:  When the access doors are opened the power will automatically shut off to the
motors  to  prevent  any  possibility  of  the  power  being  inadvertently  turned  on  to  the  slitters  while  the
operator is making adjustments.

7- BLADE ADJUST FINISH

When the operator is finished adjusting the blades he/she will have to reset the power on button in the
Main Menu to re-energize the panel. Once the power is on, press Border Mode. In the Border Mode
select Blade Adjust Finish and the material will reverse feed until the dancer bar returns to the middle
position. Note: if it is necessary to feed more material through to get back to where the slitters were
reset this will have to be done in the Manual mode.

8- SLITTERS DISABLE

When this button is pressed the IN-FEED guide roller will lift to prevent the border from coming in
contact with the slitters. This is useful if rolling border to be slit at a later date.

9- WINDER DISABLE

When this button is pressed the winder will be disabled. This is useful if slitting border into a box rather
than winding it on a roll.

10- BORDER LENGTH SINCE LAST CUT

The distance in inches since the cross cut was last activated.

11- MAIN MENU

Return to Main Menu

12- RUN

Machine will start running on this mode

13- STOP

Machine will Stop

From

the

library

of:

Diamond

Needle

Corp

«
...
29
30
31
32
33
...
»

Содержание 1393E





























































Отзывы:

Нет отзывов