Atlanta Attachment Company 1344S88, Техническое руководство и перечень запасных частей

Страница: 21 / 66

Technical Manual & Parts Lists
16
Fig. 7
Threading the Machine
Either left twist or right twist thread may be used in the needles and loopers. Rough or uneven
thread or thread which passes through the needle eye with difficulty will interfere with successful
operation of the machine.
Upper Threading
Turn the machine pulley over toward the operator until the needle bar is at its highest point. Pass
the thread from the unwinder through the threading points indicated in Fig. 7. Draw approximately two
inches of thread through the needle eye with which to start sewing. Make certain that each thread passes
through the thread tension device.
Lower Threading
Open the front table section, remove the bed slide and
turn the machine pulley over toward the operator until the
needle bar is at its highest point. Move the looper throw-out
gear locking plunger rod and looper throw-out rack rod,
Fig. 7, out as far as possible. This will place loopers in
position for easier threading and prevent accidental
operation of machine until loopers are returned to sewing
position.