ATL Berkshire IP5000, Руководство пользователя

Страница: 22 / 148

ATL Berkshire 5000 User Manual, Release 2.2.1
22
3.1.3 Redialing
To dial the phone number which has been most recently dialed:
1. Pick up the handset.
2. Press key ‘
Function
’ > ‘
Redial
’ (keypad ‘
9
’). The calling screen will be shown as
below:
C a l l i n g 2 0 0 0 . . .
If you are going to use speakerphone for the redial call, you can press the “
Redial
” button
directly without pressing the “Handsfree” button.
3.2 Terminating a call
To end a call, do one of the followings:
1. Go on-hook.
2. Press the hook switch.
3. Press the ‘Cancel’ button.
4. Press the ‘
“Handsfree”
’ button if the speakerphone is in use.
Otherwise, if the call is terminated by the other party, a busy tone will be heard. The following
screen will also be shown:
C a l l t e r m i n a t e d b y
2 0 0 0
Follow the methods of terminating a call to hang up the call completely.
3.3 Answering a call
(In order to receive calls properly, the screen should show a normal phone icon in standby
mode. If the screen shows a phone icon with a cross , the phone may not be able to receive
calls. Refer to Section 2.2 to fix the problem before continuing.)
When there is an incoming call, the phone will ring and the ‘
Line1/Hold
’ (or ‘
Line2/Hold
’) LED
will flash. The caller number and name, if available, will be shown on the screen as below: