background image

– 

8 –

– 

9 –

RECEIVING CALLS

Incoming calls will be announced by the audible ringer and flashing LED.

To answer the call simply lift the handset or if a headset is plugged in press the 
Headset button.

MAKING CALLS

Pick up the handset, or press the Headset button,       listen for dial tone and 
dial the number you wish to call

ENDING CALLS

Simply return the handset to its normal position, or if you are using the 
Headset press the Headset button.

FEATURES AND FACILITIES

HEARING AID COMPATIBILITY

For hearing aid users, an inductive coupler has been installed in the handset to 
improve audible efficiency.

TRANSFER KEY (RECALL)

Berkshire 220 telephones are provided with a ‘TRANSFER’ key, required by 
modern public and private exchanges, in order to gain access to various 
features such as ‘transferring a call’.

REDIAL KEY

If you wish to redial the last number you dialled, you can do so by lifting the 
handset and pressing the ‘REDIAL’ button.

MUTE KEY

The microphone in the handset or headset can be turned off (mute) in order for 
you to refer to a colleague without your caller hearing you.

•  Pressing the ‘MUTE’ button turns the microphone off.
•  Pressing the ‘MUTE’ button again turns the microphone back on.

Содержание Berkshire 220













Отзывы: