22
| Auto Wash 365 Manual | v1.1
©
A
TL
A
g
ricu
ltu
ra
l
Te
ch
n
olog
y
L
imite
d:
Ju
n
e
2
0
1
9
Setting the Milk Tank Lock Out
This sets whether the milk tank lock prevents milking starrting if the milk delivery line is not in the correct
position (i.e. attached to the milk tank) and the milk safety switch engaged. It is an ON/OFF setting. The
factory default is OFF.
Press the Enter key
to toggle between ON or OFF.
Press the Down Arrow key
to move onto the vacuum pump type setting.
Setting the Vacuum Pump Type
This sets the type of signal required for controlling the vacuum pumps. ON/OFF leaves the outputs on for the
entire time they are running. PULSED pulses the outputs sequentially and pulses the vac pump stop at the
end of the program. The factory default is ON/OFF.
Press the Enter key
to toggle between ON/OFF or PULSED.
Press the Down Arrow key
to move onto setting the peristaltic pump calibration.
Calibrating the Peristaltic Pumps
Press the Enter key
to set the peristaltic pump calibration. See separate section on
calibrating the
peristaltic pumps.
Press the Down Arrow key
to move onto the test displays diagnostic.
Innovation In and Out of Parlour
Enter
Setup
milk t lock off
Enter
Setup
pump calibration
Enter
Setup
vac type on/off
