ATIM Cloud Wireless ACW/868-DINDIO Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 18

ATIM Cloud Wireless ACW/868-DINDIO Скачать руководство пользователя страница 3

3

ATIM_ACW-DINDIO_868_UG_EN_V1.3

Document version history

Version
document

Date

Description

Author

Concerned
soft version

0.1

13/11/2015

Creation

YL

0.2

03/04.2016

DIN version

AM

1.3

04/01/2018

Corrections

SC

1.1

Disclaimer

The information contained in this document is subject to change without warning and does not
represent a commitment on the part of ATIM radiocommunications. ATIM radiocommunications

provides this document ‘as

-

is’ with no warranty of any kind, express or implied, including but not

limited to implied warranties of merchantability or fitness for a particular purpose. ATIM
radiocommunications may make changes and/or improvements to this manual or to the product(s) or
program(s) described in this manual, at any time.

Trademarks and copyright

ATIM radiocommunications®, ACW ATIM Cloud Wireless® and ARM Advanced Radio Modem® are
registered trademarks of ATIM SARL in France. The other trademarks mentioned in this document are
the property of their respective owners.

«
1
2
3
4
5
...
»

Содержание Cloud Wireless ACW/868-DINDIO



















Отзывы:

Нет отзывов