6
Offset for advanced settings
The offset is a voltage added to all pixels. It’s used to ensure the digitised pixel
values remain above zero while maximising dynamic range. It can set between
0 - 65534, with the default setting as the low pre-set values.
Power modes
The Apx 60 has three different selectable power modes.
PowerSave
– This mode allows the camera to shut down non-essential
circuits during exposures.
This is the mode that should be used for deep
sky imaging as it will create the least noise in the image.
Normal mode
– This is the normal operating mode where all necessary circuits
are powered up.
Fast
– This mode allows the camera to be used for high-speed imaging, this is
handy for planetary imaging and daytime imaging.
The power settings can be adjusted either by connection the camera in Atik
Dusk or by using the properties box as you are connecting to a camera using
ASCOM
