ATI Technologies XCLAIM GA, Руководство пользователя

Страница: 30 / 41

Page 20 Troubleshooting Tips
Solutions to Common Problems
Why can't I get a resolution higher than 640x480?
If the monitor is connected to the VGA monitor port on
your XCLAIM GA card...
¥ go to the ATI Displays control panel, click ÒDisplaysÓ,
and select a monitor type which matches the
speciÞcations of your monitor. This allows more
resolutions to be available for selection in the Monitors
control panel.
If the monitor is connected to the Apple monitor port on
your XCLAIM GA card...
¥ The problem likely relates to Monitor Sensing (refer to
page 8). Any monitor connected to an Apple-type
monitor port must supply "sense code information" so
that the graphics card can conÞgure itself for the
attached monitor. If the detected sense code does not
represent the capabilities of your monitor, then the card
cannot conÞgure itself properly. You need to attach a
monitor adapter that supplies the proper sense code
for your monitor. Monitor adapters can be obtained
from the monitor manufacturer, or from your local
Apple Authorized Dealer.
I am using a monitor adapter to supply the sense code,
but I only get one resolution, even though I have a
multiscan monitor. Why?
¥ If the adapter is conÞgurable, you need to adjust it to
one of the multiscan options that best matches your
monitor. If the adapter is not conÞgurable, you need a
new adapter with the proper sense code for a
multiscan monitor.
I have a monitor with three BNC connectors. Why
won't it work with my XCLAIM GA card?
¥ Monitors that only have three BNC connectors require
ATIBook Page 20 Wednesday, April 2, 1997 9:50 AM