ATI Technologies TV WONDER ELITE, Руководство пользователя

Страница: 13 / 30

Detailed Installation 7
2
Unplug the computer’s power cord, and disconnect all cables from the
back of your computer.
3
Remove the computer cover. If necessary, consult your computer’s
manual for help in removing the cover.
4
Locate an available PCIe X1 or PCI slot (as appropriate) and, if
necessary, remove the metal back-plate cover.
5
Align your TV WONDER™ ELITE with the appropriate slot, and
then press it in firmly until the card is fully seated.
6
Screw in or fasten the TV WONDER™ ELITE securely. Replace
your computer cover.
7
Reconnect any cables you have disconnected, and then plug in the
computer’s power cord.
8
Attach a TV antenna or cable cord to the TV connector on your TV
WONDER™ ELITE.
9
Attach an FM antenna to the FM connector on your TV WONDER™
ELITE. If your cable service provides an FM signal, you can use a
splitter to connect the cable to the FM and TV connectors on your
card.
10
Plug the purple input dongle that came with your TV WONDER™
ELITE into the AV IN connection.
11
Attach your S-video source and/or composite source to the proper
input on the purple input dongle.
12
Turn on the monitor, and then your computer. If you have properly
installed your card, operating system messages will appear once the
boot procedure is finished. Proceed with the installation of drivers and
software.
L WARNING
- Wait approximately 20 seconds after unplugging the
power cord before disconnecting a peripheral or removing a
component from the motherboard to avoid possible damage to the
motherboard.
L
WARNING
- Remember to discharge your body’s static electricity by
touching the power supply or the metal surface of the computer
chassis before touching the motherboard or components.