ATI Technologies SmartTachSmartTach, Руководство пользователя

Страница: 83 / 110

OPERATION
SmartTach Operating Manual Page 5-3
Pushbutton Switch Functions
The function of each Pushbutton switch is dependent on the current
operating mode. The information below describes the function of each
Pushbutton switch while in the Measure Mode. Please refer to the
Configuration Section for Pushbutton switch functions when in the
Configure mode.
Measure Mode
S m a r tT a c h
PULSE CONFIG
ENTER MODE
2 3 5 0 r p m
Measurement
Mode
Display: Measured data
PULSE: Flashing (if pulses are being received)
CONFIG: Off : Display Min Input Value
: Display Max Input Value
ENTER: Toggle Display On/Off
MODE: Enter
Configuration mode
Figure 5 - 1: Normal Measurement Display
S m a r tT a c h
PULSE CONFIG
ENTER MODE
4 9 5 2 M a x
Max Value
Display
Display: Maximum Value
PULSE: Flashing (if pulses are being received)
CONFIG: Off : Display Min Input Value
: Return to measurement mode
ENTER: Reset Max and Min Values
MODE: Enter
Configuration mode
Figure 5 - 2: Maximum Value Display
S m a r tT a c h
PULSE CONFIG
ENTER MODE
4 2 5 M i n
Min Value
Dispay
Display: Minimum Value
PULSE: Flashing (if pulses are being received)
CONFIG: Off : Return to Measurement Mode
: Display Max Input Value
ENTER: Reset Max and Min Values
MODE: Enter
Configuration mode
Figure 5 - 3: Minimum Value Display