6
Getting Started...
refer to ATI’s online help file. Simply double-click the ATI icon on the
taskbar to access the online help.
For more information about using the ATI PLAYER, open the online
help by clicking on the [?] in the upper-right corner of the PLAYER
window.
Installing Enhanced Drivers for Windows
®
NT
Make sure your operating system has been updated to Service Pack 3
(SP3) or later before attempting to install your RAGE™ 128-based
graphics accelerator card. After installing your graphics card,
Windows
®
NT will default to standard VGA mode (640 x 480,
16 colors).
To install the enhanced driver for
Windows
®
NT 4.0
1
Insert the ATI INSTALLATION CD-ROM into your CD-ROM
drive.
If Windows
®
NT runs the CD-ROM automatically, proceed to step 5.
2
Click Start.
3
Select Run.
4
Type the following:
D:\ATISETUP
(If D is not your CD-ROM drive, substitute D with the correct drive
letter.)
5
Click on Easy Install to begin the Installation Wizard.
6
Follow the Wizard’s on-screen instructions to complete the
installation.
For correct resolution and refresh rate operation, you need to select a
display device. Please refer to the online help for more information.
OnlineManual.book Page 6 Thursday, February 4, 1999 4:08 PM
